Specifications and requirements9EMU34521SpecificationsTIP:“(AL)” stated in the specification data belowrepresents the numerical value for the alumi-num propeller installed.Likewise, “(SUS)” represents the value forstainless steel propeller installed and “(PL)”for plastic propeller installed.EMU2821KDimension:Overall length:F200BET 892 mm (35.1 in)F200CET 868 mm (34.2 in)F225BET 868 mm (34.2 in)FL200BET 892 mm (35.1 in)FL200CET 868 mm (34.2 in)FL225BET 868 mm (34.2 in)Overall width:634 mm (25.0 in)Overall height X:F200BET 1805 mm (71.1 in)F200CET 1829 mm (72.0 in)F225BET 1829 mm (72.0 in)FL200BET 1805 mm (71.1 in)FL200CET 1829 mm (72.0 in)FL225BET 1829 mm (72.0 in)Transom height X:643 mm (25.3 in)Weight (SUS) X:F200BET 272.0 kg (600 lb)F200CET 283.0 kg (624 lb)F225BET 278.0 kg (613 lb)FL200BET 272.0 kg (600 lb)FL200CET 283.0 kg (624 lb)FL225BET 278.0 kg (613 lb)Performance:Full throttle operating range:5000–6000 r/minMaximum output:F200BET 147.1 kW@5500 r/min (200HP@5500 r/min)F200CET 147.1 kW@5500 r/min (200HP@5500 r/min)F225BET 165.5 kW@5500 r/min (225HP@5500 r/min)FL200BET 147.1 kW@5500 r/min (200HP@5500 r/min)FL200CET 147.1 kW@5500 r/min (200HP@5500 r/min)FL225BET 165.5 kW@5500 r/min (225HP@5500 r/min)Idle speed (in neutral):650 ±50 r/minEngine:Type:4-stroke VDisplacement:3352.0 cm³Bore × stroke:94.0 × 80.5 mm (3.70 × 3.17 in)Ignition system:TCISpark plug (NGK):LFR6A-11Spark plug gap:1.0–1.1 mm (0.039–0.043 in)Control system:Remote controlStarting system:Electric starterStarting carburetion system:Electronic fuel injectionValve clearance (cold engine) IN:0.17–0.24 mm (0.0067–0.0094 in)Valve clearance (cold engine) EX:0.31–0.38 mm (0.0122–0.0150 in)Min. cold cranking amps (CCA/EN):711.0 A