Yamaha F200B Owner's Manual

Also see for F200B: Rigging guide Owner's manual Service manual

Contents

Components19matically to its set position. The remote con-trol will then engage forward and reversenormally.EMU25976Throttle friction adjusterA friction device provides adjustable resis-tance to movement of the throttle grip or theremote control lever, and can be set accord-ing to operator preference.To increase resistance, turn the adjusterclockwise. To decrease resistance, turn theadjuster counterclockwise. WARNING! Donot overtighten the friction adjuster. Ifthere is too much resistance, it could bedifficult to move the remote control leveror throttle grip, which could result in anaccident. [EWM00032]When constant speed is desired, tighten theadjuster to maintain the desired throttle set-ting.EMU25995Engine shut-off cord (lanyard) andclipThe clip must be attached to the engine shut-off switch for the engine to run. The cordshould be attached to a secure place on theoperator’s clothing, or arm or leg. Should theoperator fall overboard or leave the helm, thecord will pull out the clip, stopping ignition tothe engine. This will prevent the boat fromrunning away under power. WARNING! At-tach the engine shut-off cord to a secureplace on your clothing, or your arm or legwhile operating. Do not attach the cord toclothing that could tear loose. Do not routethe cord where it could become entangled,preventing it from functioning. Avoid acci-dentally pulling the cord during normaloperation. Loss of engine power meansthe loss of most steering control. Also,without engine power, the boat could slowrapidly. This could cause people and ob-jects in the boat to be thrown forward.[EWM00122]ZMU04563ZMU046461. Cord2. Clip3. Engine shut-off switchZMU045651 2 3