Trouble Recovery79TIP:When you are maneuvering at low speed,such as near a dock, it is recommended thatboth engines be running with one in neutralgear if possible.EMU29474Replacing fuseIf a fuse has blown, remove the electrical cov-er, open the fuse holder and remove the fusewith a fuse puller (if equipped). Replace it witha spare one of the proper amperage.WARNINGEWM00631Substituting an incorrect fuse or a piece ofwire could allow excessive current flow.This could cause electric system damageand a fire hazard.Consult your Yamaha dealer if the new fuseimmediately blows again.1. Electrical cover2. Fuse puller3. Spare fuse (10 A, 15 A, 20 A, 30 A, 60 A)1. Electric throttle valve / ECM (Electronic con-trol module) fuse (10 A)2. Ignition coil / Fuel injector / Variable cam-shaft timing / ECM (Electronic Control Mod-ule) fuse (30 A)3. Main switch / PTT switch fuse (20 A)4. Starter relay fuse (30 A)5. Fuel feed pump fuse (10 A)6. Fuel pump fuse (15 A)
