Specifications and requirements10Min. rated capacity (20HR/IEC):100 AhMaximum generator output:F200BET 42 AF200CET 44 AF225BET 44 AFL200BET 42 AFL200CET 44 AFL225BET 44 ADrive unit:Gear positions:Forward-neutral-reverseGear ratio:2.00(30/15)Trim and tilt system:Power trim and tiltPropeller mark:F200BET T / M2F200CET T / MF225BET T / MFL200BET TL / ML1FL200CET TL / MLFL225BET TL / MLFuel and oil:Recommended fuel:Regular unleaded gasolineMin. research octane:90Recommended engine oil:4-stroke outboard motor oilRecommended engine oil grade 1:SAE 10W-30/10W-40/5W-30API SE/SF/SG/SH/SJ/SLTotal engine oil quantity (oil pan capacity):5.6 L (5.92 US qt, 4.93 Imp.qt)Lubrication:Wet sumpRecommended gear oil:Hypoid gear oil SAE#90Gear oil quantity:F200BET 1.150 L (1.216 US qt,1.012 Imp.qt)F200CET 1.150 L (1.216 US qt,1.012 Imp.qt)F225BET 1.150 L (1.216 US qt,1.012 Imp.qt)FL200BET 1.000 L (1.057 US qt,0.880 Imp.qt)FL200CET 1.000 L (1.057 US qt,0.880 Imp.qt)FL225BET 1.000 L (1.057 US qt,0.880 Imp.qt)Tightening torque for engine:Spark plug:25.0 Nm (2.55 kgf-m, 18.4 ft-lb)Propeller nut:55.0 Nm (5.61 kgf-m, 40.6 ft-lb)Engine oil drain bolt:28.0 Nm (2.86 kgf-m, 20.7 ft-lb)Engine oil filter:18.0 Nm (1.84 kgf-m, 13.3 ft-lb)Noise and vibration level:Operator sound pressure level (ICOMIA39/94 and 40/94):79.7 dB(A)EMU33554Installation requirementsEMU33564Boat horsepower ratingWARNINGEWM01560Overpowering a boat can cause severe in-stability.Before installing the outboard motor(s), con-firm that the total horsepower of your out-board motor(s) does not exceed the boatsmaximum horsepower rating. See the boat’scapacity plate or contact the manufacturer.