Operation42EMU36493Flushing deviceCheck that the flushing device’s garden hoseconnector is securely screwed on to the fittingon the bottom cowling. NOTICE: If the gar-den hose connector is not properly con-nected, cooling water can leak out and theengine can overheat during operation.[ECM01801]EMU36941Install cowling1. Be sure that all cowling lock levers are re-leased.2. Be sure that the rubber seal is seated allthe way around the engine.3. Place the cowling on top of the seal.4. Check to be sure it fits properly in the rub-ber seal.5. Move the levers to lock the cowling asshown. NOTICE: If the top cowling isnot installed correctly, water spray un-der the top cowling can damage theengine, or the top cowling can blow offat high speeds. [ECM01991]After installing, check the fitting of the topcowling by pushing it with both hands. If thetop cowling is loose, have it repaired by yourYamaha dealer.1. Fitting2. Flushing deviceZMU061641 2ZMU06131ZMU06133
