Operation41EMU36483Engine shut-off cord (lanyard)Inspect the engine shut-off cord and clip fordamage, such as cuts, breaks, and wear.EMU37053Engine oil1. Put the outboard motor in an upright po-sition (not tilted). NOTICE: If the motoris not level, the oil level indicated onthe dipstick may not be accurate.[ECM01790]2. Remove oil dipstick and wipe it clean.3. Insert the dipstick and remove it again.Be sure to completely insert the dipstickinto the dipstick guide, otherwise the oillevel measurement will be incorrect.4. Check the oil level using the dipstick to besure the level falls between the upper lev-el mark and lower level mark. Consultyour Yamaha dealer if the oil level is outof specified level or if it appears milky ordirty.EMU27153Engine Check the engine and engine mounting. Look for loose or damaged fasteners. Check the propeller for damage. Check for engine oil leaks.1. Cord2. Clip3. Engine shut-off switch1. Cord2. Clip3. Engine shut-off switch1. Cord2. ClipZMU045651 2 3ONSTARTOFFONSTARTOFF1ZMU0456423ONSTARTOFF ONSTARTOFF123ZMU058183. Engine shut-off switch1. Oil dipstick2. Lower level mark3. Upper level mark1 32ZMU07057
