Yamaha F200B Owner's Manual

Also see for F200B: Rigging guide Owner's manual Service manual

Contents

Components21the switch “ ” (down) tilts the outboard motordown and trims it down. When the switch is re-leased, the outboard motor will stop in its cur-rent position. For instructions on using thepower trim and tilt switch, see pages 49 and51.EMU26155Power trim and tilt switch on bottomcowlingThe power trim and tilt switch is located on theside of the bottom cowling. Pushing the switch“ ” (up) trims the outboard motor up, andthen tilts it up. Pushing the switch “ ” (down)tilts the outboard motor down and trims itdown. When the switch is released, the out-board motor will stop in its current position.For instructions on using the power trim andtilt switch, see page 51.WARNINGEWM01031Use the power trim and tilt switch locatedon the bottom cowling only when the boatis at a complete stop with the engine off.Attempting to use this switch while theboat is moving could increase the risk offalling overboard and could distract theoperator, increasing the risk of collisionwith another boat or an obstacle.EMU26163Power trim and tilt switches (twin bin-nacle type)The power trim and tilt system adjusts the out-board motor angle in relation to the transom.Pushing the switch “ ” (up) trims the out-board motor up, and then tilts it up. Pressingthe switch “ ” (down) tilts the outboard motordown and trims it down. When the switch is re-leased, the outboard motor will stop in its cur-rent position. For instructions on using thepower trim and tilt switches, see pages 49 and51.TIP:On the dual engine control, the switch on theremote control grip controls both outboardmotors at the same time.UPDNZMU039381. Power trim and tilt switchZMU04601DNUP1