Yamaha F200B Owner's Manual

Also see for F200B: Rigging guide Owner's manual Service manual

Contents

Instruments and indicators27EMU26713Fuel gaugeEight segments indicate the fuel level. Whenall segments are showing, the fuel tank is full.The fuel level reading can be inaccurate dueto the position of the sensor in the fuel tankand the attitude of the boat in the water. Oper-ation with bow-up trim or continuous turningcan give false readings.Do not adjust the selector switch for fuel sen-sor. Incorrectly setting the selector switch onthe gauge will give false readings. Consultyour Yamaha dealer on how to correctly setthe selector switch. NOTICE: Running out offuel can damage the engine. [ECM01770]EMU36071Trip meter / Clock / VoltmeterThe display shows either the trip meter, theclock, or the voltmeter.To change the display, press the “ ”(mode) button repeatedly until the indicator onthe face of the gauge points to “ ” (tripmeter), “ ” (clock), or “ ” (voltmeter).EMU26691Trip meterThis gauge displays the distance the boat hastraveled since the gauge was last reset.The trip distance is shown in kilometers ormiles depending upon the unit of measure-ment selected for the speedometer.To reset the trip meter to zero, press the “ ”(set) and “ ” (mode) buttons at the sametime.The trip distance is kept in memory by batterypower. The stored data will be lost if the bat-tery is disconnected.EMU26701ClockTo set the clock:1. Be sure the gauge is in the “ ” (time)mode.2. Press the “ ” (set) button; the hour dis-play will begin blinking.3. Press the “ ” (mode) button until thedesired hour is displayed.4. Press the “ ” (set) button again, theminute display will begin blinking.5. Press the “ ” (mode) button until thedesired minute is displayed.6. Press the “ ” (set) button again to startthe clock.1. Cap2. Selector switch (for speed unit)3. Selector switch (for fuel sensor)ZMU01745