LISTENING TO FM/AM RADIO17 EnBASICOPERATION English1 Press TUNER to select TUNER as the inputsource.2 Press FM or AM to select the reception band(FM or AM).3 Press and hold TUNING H / I for more than1 second to begin tuning.Press H to tune in to a higher frequency.Press I to tune in to a lower frequency.The frequency of the received station is shown in thefront display.If a broadcast is being received, “TUNED” indicatoron the front display will be lit. If a stereo broadcast isbeing received, the “STEREO” indicator will also lit.If the tuning search does not stop at the desiredstation because the station signals are weak, use thefollowing keys to set a frequency.TUNING H / I:Increase/decrease the frequency.Numeric keys:Enter a frequency directly. For example, to select98.50 MHz, press “9”, “8”, “5” and “0” (or ENT).• When you press the numeric keys on the remote control duringpreset tuning, a preset number is selected. Set the tuning modeto frequency tuning mode using TUNING H / I beforepressing the numeric keys.• “Wrong Station!” is displayed on the front display if you enter afrequency that is out of receivable range. Make sure that theentered frequency is correct.yWhen the signal reception for an FM radio station is unstable,switching to monaural may improve it.■ Improving FM receptionIf the signal from the station is weak and the sound qualityis not good, set the FM band reception mode to monauralmode to improve reception.1 Press MODE repeatedly to select “Stereo”(automatic stereo mode) or “Mono”(monaural mode) when this unit is tuned in toan FM radio station.When Mono is selected, FM broadcasts will be heardin monaural sound.The STEREO indicator on the front panel lights up whilelistening to a station in stereo.Listening to FM/AM radioFM/AM tuningNotesTUNING H / IFMAMTUNERMODETV INPUTTV VOL TV CHTV1 2 3 45 6 7 89 0 10 ENT+LINE1 LINE2 LINE3SHUFFLE REPEAT MODEPHONOTUNER CDFM AMPRESET TUNINGMEMORYHOME NOWPLAYINGUSB NETNumeric keysSTEREOTUNEDSWCLSL SRRVOL.SP AFM98.50MHzFrequencyNote
