44 EnTroubleshooting■ Remote controlProblem Cause Remedy SeepageThe remote controldoes not work norfunction properly.Wrong distance or angle. The remote control will function within a maximumrange of 6 m (20 ft) and no more than 30 degrees off-axis from the front panel.9Direct sunlight or lighting (from aninverter type of fluorescent lamp, etc.) isstriking the remote control sensor of thisunit.Reposition this unit.—The batteries are weak. Replace all batteries. —The remote control ID and this unit’s IDdo not match.Switch the remote control ID or this unit’s ID. 34The remote control code was not correctlyset.Try setting another code of the same manufacturerusing “LIST OF REMOTE CONTROL CODES” atthe end of this manual.—Even if the remote control code iscorrectly set, there are some models thatdo not respond to the remote control.Use the supplied remote control for the components.—You did not press the input selection keycorresponding to the component you aretrying to control.Press the input selection key corresponding to thecomponent you are trying to control, and then pressthe desired remote control key(s).—
