Updating the unit’s firmware via the network39 EnADVANCEDOPERATION EnglishNew firmware that provides additional features or product improvements will be released as needed. If the unit isconnected to the Internet, you can download the firmware via the network and update it.yYou can also update the firmware using the USB memory devicefrom the “ADVANCED SETUP” menu (p.35).1 Press SETUP.2 Use the cursor keys to select “NetworkSetup” and press ENTER.3 Use the cursor keys to select “Information”and press ENTER.If new firmware is available, “NewFwAvailable”appears on the front display.4 Press RETURN to return the previous state.5 Use the cursor keys to select “Update” andpress ENTER.6 To start the firmware update, press ENTER.The unit to restart and the firmware update starts.yTo cancel the operation without updating the firmware, pressSETUP.7 If “UPDATE SUCCESS” appears on the frontdisplay, press A (power) on the front panel.The firmware update is complete.Updating the unit’s firmware via the network• Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20minutes or more (depending on your Internet connection speed).• If the unit is connected to the wireless network via a wireless network adapter, network update may not be possible depending onthe condition of the wireless connection. In this case, update the firmware using the USB memory device (p.35).NotesSETUPENTERSETUP OPTIONRETURNTOPMENU POP-UPMENU MUTEENTER VOLUMEHOME NOWPLAYINGDISPLAYCursor keys B / CVOL.SP ANewFwAvailableVOL.SP APerformUpdate
