33 EnConfiguring various functions (SETUP menu)ADVANCEDOPERATION English■ Network NameEdits the network name (the unit’s name on the network)displayed on other network devices.1 Select “Network Name”.2 Press ENTER to enter the name edit display.3 Use the cursor keys (D / E) to move the editposition and the cursor keys (B / C) to selecta character.4 To confirm the new name, press ENTER.5 To exit from the menu, press SETUP.■ UpdateUpdates the firmware via the network.Sets the maximum volume to prevent excessive loudness.Setting range-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dBDefault+16.5 dBSets the initial volume when the receiver is turned on.Sets the amount of time for the auto-standby function. Ifyou do not operate the unit for the specified time, the unitwill automatically go into standby mode.yJust before the unit enters standby mode, “AutoPowerStdby”appears and then countdown starts in the front display.Enables/disables the eco (power saving) mode.When the eco mode is enabled, you can reduce the unit’spower consumption.• Be sure to press ENTER to restart the unit after selecting asetting. The new setting will take effect after the unit isrestarted.• When “ECO Mode” is set to “On”, the front display maybecome dark.• If you want to play audio at high volume, set “ECO Mode” to“Off”.Configures the DC OUT jack setting.Power ModeSelects how to supply power to the Yamaha AV accessoryconnected to the DC OUT jack.PerformUpdateStarts the process to update the unit’s firmware.For details, see “Updating the unit’s firmware viathe network” (p.39).Version Displays the version of the firmware installed onthe unit.ID Displays the system ID number.Max VolumeVOL.SP ANetworkNameVOL.SP AR-N500XXXXXXNetwork nameVOL.SP AR-N500XXXXXXInitial VolumeOff (default) Sets the level to the volume level of the unitwhen it last entered standby mode.Mute Sets the unit to mute the audio output.-80.0 dB to+16.5 dB (0.5 dBincrements)Sets the level to the specified volume level.AutoPowerStdbyOff Does not set the unit to standby modeautomatically.2 hours,4 hours,8 hours (default),12 hoursSets the unit to standby mode when youhave not operated the unit for the specifiedtime. For example, when “2 hours” isselected, the unit will switch to standbymode if you do not operate it for 2 hours.ECO ModeOff (default) Disables the eco mode.On Enables the eco mode.NotesDC OUTCont(default)Supplies power through the DC OUT jackcontinuously regardless of the power state (on/standby) of the unit.Sync Supplies power through the DC OUT jack onlywhen the unit is turned on.
