Specifications47 EnADDITIONALINFORMATION EnglishAUDIO SECTION• Minimum RMS Output Power(20 Hz to 20 kHz, 0.04% THD, 8 ) ..........................80W + 80W• Dynamic power per channel (IHF)(8/6/4/2 ) .......................................................105/125/150/178 W• Maximum power per channel [Europe model only](1 kHz, 0.7% THD, 4 ) ......................................................105 W• IEC power [Europe model only] (1 kHz, 0.04% THD, 8 ).....84 W• Power band width(0.06% THD, 40W, 8 ) ...................................... 10 Hz to 50 kHz• Damping factor (SPEAKERS A)1 kHz, 8 .................................................................... 150 or more• Maximum effective output power (JEITA)[Asia and General models only](1 kHz, 10% THD, 8 ) ................................................... 115 W• Input sensitivity/Input impedancePHONO (MM) ........................................................ 3.5 mV/47 kCD, etc. .................................................................. 200 mV/47 k• Maximum input signalPHONO (MM) (1 kHz, 0.003% THD) .................. 60 mV or moreCD, etc. (1 kHz, 0.5% THD) ................................... 2.2 V or more• Output level/Output impedanceCD, etc. (Input 1 kHz, 200 mV)REC OUT ........................................................... 200 mV/1.0 kSubwoofer OUT ......................................................4.0 V/1.2 kCut off frequency................................................................ 90 HzCD, etc. (Input 1 kHz, 200 mV, 8 )PHONES ............................................................. 410 mV/470 • Frequency responseCD, etc. (20 Hz to 20 kHz) ............................................0 ± 0.5 dBCD, etc., PURE DIRECT on (10 Hz to 100 kHz) .........0 ± 1.0 dB• RIAA equalization deviationPHONO (MM) ..................................................................± 0.5 dB• Total harmonic distortionPHONO (MM) to REC (20 Hz to 20 kHz, 3 V) ..... 0.025% or lessCD, etc. to SPEAKERS(20 Hz to 20 kHz, 40.0 W, 8 ) ........................... 0.015% or less• Signal to noise ratio (IHF-A network)PHONO (MM) (5 mV input shorted) ..................... 87 dB or moreCD, etc., PURE DIRECT on(200 mV input shorted) ...................................... 100 dB or more• Residual noise (IHF-A network) ............................................ 30 μV• Channel separationCD, etc. (5.1 k input shorted, 1/10 kHz) ......... 65/50 dB or more• Tone control characteristicsBASSBoost/Cut (20 Hz) ...........................................................± 10 dBTurnover Frequency ......................................................... 350 HzTREBLEBoost/Cut (20 kHz) .........................................................± 10 dBTurnover Frequency ........................................................ 3.5 kHz• Continuous loudness controlAttenuation (1 kHz) ............................................................ –30 dB• Gain tracking error (+16.5 to -80 dB) ..........................0.5 dB or less• Digital inputOPTICALCOAXIALSupport audio sample rate ................................... 32 kHz to 192 kHzFM SECTION• Tuning range[U.S.A. and Canada models] ............................87.5 to 107.9 MHz[Asia and General models] .........87.5/87.50 to 108.0/108.00 MHz[U.K., Europe, Korea, Australia models] .....87.50 to 108.00 MHz• 50 dB quieting sensitivity (IHF, 1 kHz, 100% MOD.)Mono ................................................................. 3.0 μV (20.8 dBf)• Signal to noise ratio (IHF)Mono/Stereo ...............................................................71 dB/69 dB• Harmonic distortion (1 kHz)Mono/Stereo ................................................................. 0.3%/0.5%Antenna input .......................................................75 unbalancedAM SECTION• Tuning range[U.S.A. and Canada models] ............................... 530 to 1710 kHz[Asia and General models] .................. 530/531 to 1710/1611 kHz[U.K, Europe, Korea, Australia models]...............531 to 1611 kHzGENERAL• Power supply[U.S.A. and Canada models] ...............................AC 120 V, 60 Hz[General model] .......................AC 110-120/220-240 V, 50/60 Hz[Korea model] ......................................................... AC220V 60Hz[Australia model] ................................................AC 240 V, 50 Hz[U.K. and Europe models] ..................................AC 230 V, 50 Hz[Asia model]........................................... AC 220-240 V, 50/60 Hz• Power consumption................................................................. 190 W• Standby power consumption ....................................... 0.1 W or lessNetwork standby on .................................................... 2.0 W Typical• Maximum power consumption[General model only] .............................................................. 380 W• Dimensions (W H D) .................................435 151 387 mm(17-1/8" 6" 15-1/4")• Weight ......................................................................9.8 kg (21.6 lbs)* Specifications are subject to change without notice.Specifications
