38 EnControlling external devices with the remote controlYou can reset the remote control codes assigned to eachinput selection keys to the factory default.1 Press CODE SET using a pointed object suchas the tip of a ballpoint pen.Perform each of the following steps within 1 minute.Otherwise, the setting will be canceled. If thishappens, repeat from Step 1.2 Press SETUP.3 Use the numeric keys to enter “9981”.Once the remote control code is successfullyregistered, “Rem: Success” appears on the frontdisplay.If “Rem: Fail” appears on the front display,registration has failed. Repeat from Step 1.Resetting remote control codesTV INPUTTV VOL TV CHTV MUTETVDISC SKIPSETUP OPTIONRETURNTOPMENU1 2 3 45 6 7 89 0 10 ENTPOP-UPMENU MUTEENTER VOLUMEHOME NOWPLAYINGDISPLAY+SOURCEIDRECEIVERCODE SETSLEEPDIMMERSPEAKERSA BCODE SETSETUPNumeric keys
