Test step 21. Disconnect the signal cable at a monitor input and short circuit the monitor input with the internal24V DC voltage source of the ZETADYN.2. Perform test run.3. The error message "380 BR:Start Error" (monitor function "NOC") or "582 BR:T2 too small"(monitor function "NCC") must be output already at the start, otherwise the monitor is faulty.4. The ZETADYN locks, no further travel is possible.5. Remove short-circuit and re-connect the signal cable.6. Repeat the test run to check the lock. A new run may not be possible, the ZETADYN is still locked.7. Release the lock by setting the “Monitoring / UNLOCK = On” parameter (see display).8. Start new run, this must take place without errors.Monitors|-" UNLOCK On|-" OnUnlock encoderRepeat test step 2 for every monitor input.16.13 Autotune functionWith asynchronous motors the motor data are often unavailable or the data specified on the nameplate are not correct. The optimum operating data for the motor can be determined with the Autotunefunction.InformationMake sure that the cabin is empty whilst performing a measurement with the Autotune function,otherwise the measuring result will be incorrect.Determining the operating data with the Autotune functionTravel|-" V_3 0.95 m/s|-" 0.95 m/sHigh travel speedStandard or DCP actuation:When you use the standard or the DCP activation, reduce V_3 to 75% of V*in the Travel menu.CAN actuation:If you use CAN activation, reduce the travel speed manually to 75% with thecontrol.Mot - - - - - - - - - - - - 04zzz _ _ _ _ _ _ _+0 %real: 0rpm 0Vprog: 0rpm +0.0AMove down with empty cabin. Check in the INFO menu/page 04 whethermotor voltage is < 320 V.If the motor voltage is > 320 V, reduce V_3 further in the Travel menu.Repeat the steps until the motor voltage is < 320 V.LCD & password->Motor name plateEncoder & BCSystem dataSelect menu "Motor name plate"Motor name plate|-" ASM_ID OFF|-"Select parameter "ASM_ID"Enter "ASM_ID=On"Translation of the original operating instructionsZETADYN 4C Special functionsR-TBA12_01-GB 1415 Part.-No. 00163371-GB180/204
