11 - -12 A Analog track A13 /A Analog track A inverse14 /B Analog track B inverse15 DGND Ground voltage supply of rotary encoderHousing Shielding5.17.4 Rotary encoder connection to terminal X-ENC8TTL incremental encoder (5V), sine encoder(1Vss)X-ENC8A/AB/B5/8V_EGND24V_EVcc/BB/AA0V876542311TTL encoder (30V)1 TTL- or sine encoderHTL encoderX-ENC8A/AB/B5/8V_EGND24V_EVcc/BB/AA0V678452311HTL encoder connection1 HTL-encoderInformationPay attention to correct connection of the signal tracks when connecting HTL incremental encoders!• signal A R input /A• signal B R input /B5.18 Rotary encoder connection for asynchronous motors (X-ENC15)InformationAt the X-ENC 15 connection, both incremental encoders for asynchronous motors and absoluteencoders for synchronous motors can be connected.CAUTION!Caution!The pin assignment of the SUB-D-socket X-ENC15 is not standardised. When using encodersfrom other manufacturers, make sure that these have the same contact assignment and aninterface with identical specification.CAUTION!Caution!Before the rotary encoder is plugged in/connected, the encoder type and resolution used must beconfigured in the "Encoder & BC/ENC_TYPE" and "Encoder & BC/ENC_INC " menus.Encoder & BC|-" ENC_Typ EnDat/SSI|-" EnDat/SSIEncoder typeEncoder & BC|-" ENC_INC 2048|-" 2048Encoder resolutionTranslation of the original operating instructionsZETADYN 4C Electrical installationR-TBA12_01-GB 1415 Part.-No. 00163371-GB38/204
