Contents - Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- INTRODUCTION
- Warning labels on the microscopes
- Fig. 1-2 Warning labels on the Axiolab 5 stand for transmitted light
- Notes on the warranty
- DESCRIPTION OF THE INSTRUMENT
- Technical data
- Interface diagram
- Control and functional elements on the microscope
- Axiolab 5 stand, Bio-TL
- Fig. 2-2 Axiolab 5 stand, Bio-TL
- Axiolab 5 stand, Bio-TL/FL
- Fig. 2-3 Axiolab 5 stand, Bio-TL/FL
- Axiolab 5 stand, Pol-TL
- Fig. 2-4 Axiolab 5 stand, Pol-TL
- Axiolab 5 stand, Pol-TL/conoscopy
- Fig. 2-5 Axiolab 5 stand, Pol-TL/Conoscopy
- Axiolab 5 stand, Pol-TL/RL
- Fig. 2-6 Axiolab 5 stand, Pol-TL/RL
- Axiolab 5 stand, Mat-TL/RL
- Fig. 2-7 Axiolab 5 stand, Mat-TL/RL
- Functions of stands keys and display elements
- Control and functional elements on microscope components
- Fig. 2-10 Binocular photo tube 30°/23 with toggle graduation 100:0/0:100
- Fig. 2-11 Binocular ergo photo tube 20°/23 with vertical adjustment
- Microscope stages
- Filter mount on luminous-field diaphragm operating ring for filter 32x4 mm
- Filter slider for reflected light stand
- Polarizer
- Microscope operating modes
- Axiocam 202 mono/208 color controls and connectors
- OSD functionality with Axiocam 202 mono/208 color
- START-UP
- Fig. 3-2 Placing tools in the storage compartment
- Attaching the binocular tube/photo tube
- Inserting eyepieces or auxiliary microscope or pinhole diaphragm
- Screwing in objectives
- Inserting and removing P&C reflector modules in/from the reflector turret
- Mounting a mechanical stage
- Fig. 3-9 Friction adjustment
- Mounting the Pol rotary stage
- Fig. 3-11 Centering the Pol rotary stage
- Fig. 3-12 Centering objectives
- Mounting the condenser
- Mounting the darkfield condenser
- Mounting or replacing the 35 W halogen lamp or the 10 W LED illuminator for transmitted light
- Fig. 3-17 Removing the LED illuminator
- Fig. 3-19 Inserting the LED illuminator
- Mounting or replacing the 35 W halogen lamp or the 10 W LED illuminator for reflected light
- Fig. 3-22 Swinging the loops out
- Fig. 3-24 Changing the LED illuminator in the adapter
- Installing or replacing the LED modules for reflected light fluorescence
- Mounting the Axiocam 202 mono or Axiocam 208 color
- Mounting optional components
- Mounting and centering the low-power system for the objectives 2.5x/4x
- Inserting the modulator disk in the condenser 0.9 BF Pol
- Switching the microscope on/off
- Using the Light Manager function
- Default factory settings of the microscope
- OPERATION
- Adjusting for ametropia (user's visual impairment) when using eyepiece reticles
- Illumination and contrast methods in transmitted light
- Fig. 4-3 Microscope settings in transmitted light brightfield microscopy
- Fig. 4-4 Setting the height stop on the condenser carrier
- Configuring transmitted light darkfield microscopy using the KÖHLER method
- Configuring transmitted light phase contrast microscopy
- ring (dark-colored, in the object)
- Configuring transmitted light polarization microscopy
- Fig. 4-7 Components for transmitted light polarization
- Fig. 4-9 Schematic diagram of the color charts developed by Michel-Lévy
- Fig. 4-10 Components for circular polarization contrast
- Configuring transmitted light polarization with the conoscopy stand
- Fig. 4-12 Determining optical character
- Fig. 4-13 Components for transmitted light polarization on the conoscopy stand
- Fig. 4-15 Schematic diagram of the color charts according to Michel-Lévy
- Fig. 4-16 Components for circular polarization contrast on conoscopy stand
- Configuring transmitted light polarization for conoscopic observation – determining the optical character of crystals
- Fig. 4-17 Axiolab 5 for transmitted light conoscopy
- Fig. 4-18 Determining the optical character
- Illumination and contrast methods in reflected light
- Fig. 4-19 Microscope settings in reflected light brightfield microscopy
- Configuring reflected light darkfield microscopy
- Configuring reflected light polarization – Proof of bireflectance and reflexion pleochroism
- Setting reflected light fluorescence
- Fig. 4-20 Components for reflected light fluorescence
- CARE, FUSE REPLACEMENT AND SERVICE
- Instrument maintenance
- Troubleshooting
- Axiocam 202/208
- Maintenance and repair
- APPENDIX
- Index
- Industrial property rights
|
ZEISS Contents / List of Illustrations Axiolab 56 430037-7444-001 05/2019Fig. 2-25 OSD menu, Home .............................................................................................................50Fig. 3-1 Setting up the microscope .................................................................................................51Fig. 3-2 Placing tools in the storage compartment ..........................................................................52Fig. 3-3 Attaching the binocular tube .............................................................................................53Fig. 3-4 Inserting eyepieces ............................................................................................................54Fig. 3-5 Inserting the eyepiece reticle..............................................................................................54Fig. 3-6 Screwing in objectives .......................................................................................................55Fig. 3-7 Replacing the reflector module ..........................................................................................56Fig. 3-8 Installing a mechanical stage .............................................................................................57Fig. 3-9 Friction adjustment ...........................................................................................................58Fig. 3-10 Replacing the snap-in Pol rotary stage, detachable Pol specimen guide and stage clips ........ 59Fig. 3-11 Centering the Pol rotary stage ...........................................................................................60Fig. 3-12 Centering objectives ..........................................................................................................61Fig. 3-13 Attaching the condenser ...................................................................................................62Fig. 3-14 Mounting the darkfield condenser .....................................................................................63Fig. 3-15 Removing the cover...........................................................................................................64Fig. 3-16 Changing the halogen lamp ..............................................................................................64Fig. 3-17 Removing the LED illuminator ............................................................................................65Fig. 3-18 Changing the LED illuminator in the adapter ......................................................................65Fig. 3-19 Inserting the LED illuminator ..............................................................................................66Fig. 3-20 Removing the cover...........................................................................................................67Fig. 3-21 Changing the halogen lamp ..............................................................................................67Fig. 3-22 Swinging the loops out .....................................................................................................68Fig. 3-23 Changing the LED illuminator ............................................................................................68Fig. 3-24 Changing the LED illuminator in the adapter ......................................................................69Fig. 3-25 Removing the module holder.............................................................................................70Fig. 3-26 Changing the LED modules ...............................................................................................70Fig. 3-27 Mounting the Axiocam 202 mono or Axiocam 208 color....................................................72Fig. 3-28 Mounting the polarizer D ..................................................................................................73Fig. 3-29 Mounting the low-power system .......................................................................................74Fig. 3-30 Modulator disk in condenser 0.9 H Pol...............................................................................75Fig. 3-31 Power supply connector on the back of the stand ..............................................................75Fig. 3-32 Mains switch on left side of microscope .............................................................................76Fig. 3-33 Intensity/LM knob and illumination modes .........................................................................76Fig. 4-1 Setting the inter-pupillary distance on the binocular tube ...................................................79Fig. 4-2 Setting the viewing height on the binocular tube ...............................................................79Fig. 4-3 Microscope settings in transmitted light brightfield microscopy ........................................... 82Fig. 4-4 Setting the height stop on the condenser carrier ................................................................83Fig. 4-5 Centering the darkfield stop on condenser, achromatic-aplanatic 0.9 H D Ph DIC................ 84Fig. 4-6 Centering the annular phase diaphragm (light-colored, in the condenser) and the phasering (dark-colored, in the object) ........................................................................................88Fig. 4-7 Components for transmitted light polarization ...................................................................90Fig. 4-8 Determining the polarization direction nγ' using a synthetic fiber as an example .................. 91 PreviousNext |