Parts Removal Replacement SL 800Service Manual Confidential and Proprietary SM-30-4072Order No. 2330-705 3 - 10 Version 02, 2019-10-24The printout may be obsolete. Check the SIS for the most current and approved version of this document.3.2.2 Illumination LED Assembly ReplacementTools and aids: Torx 10Precondition: The Power Module has been switched offProcedure1) Remove 2 fixation screws on top of the cover(Torx 10), see Fig. 21.2) Carefully remove the cover.3) Disconnect the LED module cable.4) Remove 2 fixation screws on top of the LEDmodule (Torx 10), see Fig. 22.Fig. 21: Illumination Unit Cover screwsReassembly1) Check the main collimator lens of the LEDmodule and keep it clean and dust free,see Fig. 23.2) Clean the lens, if necessary.3) Reassemble in reverse order.Fig. 22: Illumination LED UnitFig. 23: Collimator lens

Zeiss SL 800 Service Manual