List Commands 109list ipx static routes Displays all IPX static routes previously defined using the add ipxroute command. It lists the following:n Network address(es) — Network address requiring this route.n NextHopNIC — Network address of the next router in the routingpath.n Gateway — Address of the host you defined as the gateway.n Metric — Number of routers a packet must pass through to get togateway.n Ticks — Delay, in hops, to reach the route destination.list lan interfaces Displays installed interfaces — Ethernet (rm0/eth:1), its operationalstatus, administration status, and interface index. If the interface isDOWN under Admin Status, you can use enable interface to try to bring itup. The command lists the following:n Name — LAN interface name: rm0/eth:1.n Oper Status — Current operating status of the interface: Up or Down.n Admin Status — Permanently configured status of the interface, Up orDown.list login_hosts Displays currently defined entries in the Login Host Table that youpreviously defined using add login_host. Values displayed are thefollowing:n Preference — Preference (priority) number assigned to the host.n Name — Name you assigned the login host.n Port — Rlogin, Telnet, and ClearTCP TCP port numbers assigned tothat login host.n Host Address — Address assigned to the login host.
