Set User Commands 163These values override phone or alternate phone numbers specified in theset user command.set dialout user siteaddress_selection [assign | negotiate | specified]appletalk [enable | disable]bridging [enable | disable]default_route_option [enable | disable]end_time [time]ip [enable | disable]ipx [enable | disable]ipx_address [IPX_address]range_appletalk_address [1-65279]remote_ip_address [IP_name or network address/mask_specifier]send_password [string]spoofing [enable | disable]start_time [time]type [ondemand | timed | continuous | manual]Sets parameters for dial-out users connecting to a remote network.Parameter Description Name of user, previously defined using add user commandwith dial-out as the type. Limit: 32 ASCII characters.local_IP_address IP address of the user making an IP connection over thisdial-out interface.send & replyscriptsSpecify commands required to establish and terminate theremote connection. Scripts must be enclosed in doublequotes if more than 64 ASCII characters. Limit: 240 ASCIIcharacters.Parameter Description Name user, previously defined using add user with dial-outas the type. Limit: 32 ASCII characters.address_selection Determines how the IP address is assigned for incoming(client) IP network connections.n Negotiate — brokers IP address between remote clientand local user.n Assign — chooses address from IP pool, configuredusing set ip system. Default.n Specified — must use IP address set inremote_IP_address value.appletalk Indicates whether the connection supports Appletalk. Set toeither Enable or Disable. Default: Enable.
