36 CHAPTER 2: A DMINISTRATIVE TOOLSdata Ancillary data. Format one or more values with the followingsyntax.Using the list network services command after typing the exampleabove displays the following:auth=on/off On indicates that login/ password authenticationshould be performed on incoming connections.Default: onlogin_banner=string ASCII string sent to a client when the connection ismade. Enclose in quotes and backslashes only whenspaces are included. Default: nonelogin_prompt=string ASCII string specifying the login prompt to be sentduring authentication. Enclose in quotes andbackslashes only when spaces are included. Authmust be on. Default: login.service_type=manage/dialout Indicates whether the service is offering modemsharing service or manage service. Modem sharingservice connects the client to a modem. Manageservice connects the client to the command line, tomanage the system. Applicable only to Telnet servers;you cannot ClearTCP into the system to manage.Default: managemodem_group=string Used for modem sharing service, indicating themodem group the service allocates a modem from.Enclose in quotes and backslashes only when spacesare included. Default: none.drop_on_hangup=on/off Used for modem sharing service. On causes the TCPsession to be dropped when the modem hangs up.Off causes the connection to remain active. Default:offCONFIGURED NETWORK SERVICESNameServerType Socket CloseAdminStatuscalls TELNETD 6001 FALSE ENABLED####DATA: auth=off, login_banner= “Welcome to My Net”,login_prompt=“My Session,drop_on_hangup=ontftpd TFTPD 69 FALSE ENABLED####DATA:telnetd TELNETD 23 FALSE ENABLED####DATA:hdmconsole TELNETD 23 FALSE DISABLED####DATA:modem_group=”slot1”
