174 CHAPTER 4: R OUTER COMMAND REFERENCEshow authenticationorshow authenticationsettingsDisplays the RADIUS and local user authentication settings, which youcan modify using the set authentication command. It lists thefollowing:n Local Authentication is — Enabled (default)/Disabled.n Remote Authentication is — Enabled (default)/Disabled.n Primary Server is — IP address of the primary RADIUS server.n Primary Server Port is — Port number of the primary server. Default:1645.n Secondary Server is — IP address of the secondary RADIUS server.n Secondary Server Port is — Port number of the secondary server.Default: 1645.n Retransmission Timeout — Interval between retransmissions. Default:3 seconds.n Max Retranmissions — Number of retransmissions before failurereported. Default: 10 seconds.show authenticationcountersDisplays the RADIUS and local user authentication counters. It lists thefollowing:n Local Successful Authentications — Number of times user/passwordpair matched.n Local Failed Authentications — Number of times user/password pairdid not match.n Remote Successful Authentications — Number of times RADIUSaccepted the user on this server.n Remote Failed Authentications — Number of times RADIUS rejecteduser on this server.AUTHENTICATION SETTINGSLocal Authentication is ENABLEDRemote Authentication is: ENABLEDHint Assigned is: DISABLEDPrimary Server is 122.122.122.134Primary Server Port is 1645Secondary Server is: 0.0.0.0Secondary Server Port is: 1645Retransmission Timeout: 3Max Retranmissions: 10
