1-8Displaying and Maintaining PoETo do… Use the command… RemarksDisplay the mapping betweenID, module, and member ID ofall PSEs.display poe deviceDisplay the power state andinformation of the specifiedPoE interfacedisplay poe interface[ interface-typeinterface-number ]Display the power informationof a PoE interface(s)display poe interface power[ interface-typeinterface-number ]Display the information of PSE display poe pse [ pse-id ]Display the power state andinformation of all PoEinterfaces connected with thePSEdisplay poe pse pse-idinterfaceDisplay the power of all PoEinterfaces connected with thePSEdisplay poe pse pse-idinterface powerDisplay all information of theconfigurations and applicationsof the PoE configuration filedisplay poe-profile [ indexindex | name profile-name ]Display all information of theconfigurations and applicationsof the PoE configuration fileapplied to the specified PoEinterfacedisplay poe-profile interfaceinterface-type interface-numberAvailable in any viewPoE Configuration ExampleNetwork requirementsThe device provides power supply for PDs through PoE interfaces.z GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 are connected to IP telephones.z GigabitEthernet 1/0/11 and GigabitEthernet 1/0/12 are connected to access point (AP) devices.z The power priority of GigabitEthernet 1/0/2 is critical.z The power of the AP device connected to GigabitEthernet 1/0/11 does not exceed 9,000 milliwatts.
