1-4Network requirementsTo detect the reachability of a static route's nexthop through a Track entry, you need to create a Trackfirst. For detailed Track configuration procedure, refer to Track Configuration in the High AvailabilityVolume.Configuration procedureFollow these steps to detect the reachability of a static route's nexthop through Track:To do… Use the command… RemarksEnter system view system-view —Associate the staticroute with a track entryip route-static dest-address { mask | mask-length }next-hop-address track track-entry-number [ preferencepreference-value ] [ tag tag-value ] [ descriptiondescription-text ]RequiredNotconfigured bydefaultz To configure this feature for an existing static route, simply associate the static route with a trackentry. For a non-existent static route, configure it and associate it with a Track entry.z If a static route needs route recursion, the associated track entry must monitor the nexthop of therecursive route instead of that of the static route; otherwise, a valid route may be mistakenlyconsidered invalid.Displaying and Maintaining Static RoutesTo do… Use the command… RemarksDisplay the currentconfiguration information display current-configurationDisplay the brief information ofthe IP routing table display ip routing-tableDisplay the detailedinformation of the IP routingtabledisplay ip routing-table verboseView information of staticroutesdisplay ip routing-table protocol static[ inactive | verbose ]Available in anyviewDelete all the static routes delete static-routes all Available Insystem view
