1-21[SwitchC-rip-1] network 1.0.0.0[SwitchC-rip-1] version 2[SwitchC-rip-1] undo summary# Configure Switch D. system-view[SwitchD] rip 1[SwitchD-rip-1] network 1.0.0.0[SwitchD-rip-1] version 2[SwitchD-rip-1] undo summary# Configure Switch E. system-view[SwitchE] rip 1[SwitchE-rip-1] network 1.0.0.0[SwitchE-rip-1] version 2[SwitchE-rip-1] undo summary# Display the IP routing table of Switch A.[SwitchA] display rip 1 database1.0.0.0/8, cost 0, ClassfulSumm1.1.1.0/24, cost 0, nexthop 1.1.1.1, Rip-interface1.1.2.0/24, cost 0, nexthop 1.1.2.1, Rip-interface1.1.3.0/24, cost 1, nexthop 1.1.1.21.1.4.0/24, cost 1, nexthop 1.1.2.21.1.5.0/24, cost 2, nexthop 1.1.1.21.1.5.0/24, cost 2, nexthop 1.1.2.2The display shows that there are two RIP routes to network 1.1.5.0/24. Their next hops are Switch B(1.1.1.2) and Switch C (1.1.2.2) respectively, with the same cost of 2. Switch C is the next hop router toreach network 1.1.4.0/24, with a cost of 1.3) Configure an additional metric for the RIP interface.# Configure an additional metric of 3 for VLAN-interface 200 on Switch A.[SwitchA] interface vlan-interface 200[SwitchA-Vlan-interface200] rip metricin 3[SwitchA-Vlan-interface200] display rip 1 database1.0.0.0/8, cost 0, ClassfulSumm1.1.1.0/24, cost 0, nexthop 1.1.1.1, Rip-interface1.1.2.0/24, cost 0, nexthop 1.1.2.1, Rip-interface1.1.3.0/24, cost 1, nexthop 1.1.1.21.1.4.0/24, cost 2, nexthop 1.1.1.21.1.5.0/24, cost 2, nexthop 1.1.1.2The display shows that there is only one RIP route to network 1.1.5.0/24, with the next hop as Switch B(1.1.1.2) and a cost of 2.Troubleshooting RIPNo RIP Updates ReceivedSymptom:
