1-34Failures due to disconnect: 0Failures due to no connection: 0Failures due to sequence error: 0Failures due to internal error: 0Failures due to other errors: 0Packet(s) arrived late: 0# Display the history of UDP echo tests.[DeviceA] display nqa history admin testNQA entry(admin admin, tag test) history record(s):Index Response Status Time1 25 Succeeded 2007-11-22 10:36:17.9Voice Test Configuration ExampleNetwork requirementsUse the NQA voice function to test the delay jitter of voice packet transmission and voice qualitybetween Device A and Device B.Figure 1-11 Network diagram for voice testsConfiguration procedure1) Configure Device B.# Enable the NQA server and configure the listening IP address as 10.2.2.2 and port number as 9000. system-view[DeviceB] nqa server enable[DeviceB] nqa server udp-echo 10.2.2.2 90002) Configure Device A.# Create a voice test group and configure related test parameters. system-view[DeviceA] nqa entry admin test[DeviceA-nqa-admin-test] type voice[DeviceA-nqa-admin-test-voice] destination ip 10.2.2.2[DeviceA-nqa-admin-test-voice] destination port 9000[DeviceA-nqa-admin-test-voice] quit# Enable voice test.[DeviceA] nqa schedule admin test start-time now lifetime forever# Disable the voice test after the test begins for a period of time.[DeviceA] undo nqa schedule admin test# Display the result of the last voice test.[DeviceA] display nqa result admin test
