1-12To do… Use the command… RemarksDisplay information about one or allcertificate attribute groupsdisplay pki certificateattribute-group { group-name |all }Available in any viewDisplay information about one or allcertificate attribute-based accesscontrol policiesdisplay pki certificateaccess-control-policy{ policy-name | all }Available in any viewPKI Configuration Examplesz The SCEP plug-in is required when you use the Windows Server as the CA. In this case, whenconfiguring the PKI domain, you need to use the certificate request from ra command to specifythat the entity requests a certificate from an RA.z The SCEP plug-in is not required when RSA Keon is used. In this case, when configuring a PKIdomain, you need to use the certificate request from ca command to specify that the entityrequests a certificate from a CA.Requesting a Certificate from a CA Running RSA KeonThe CA server runs RSA Keon in this configuration example.Network requirementsz The device submits a local certificate request to the CA server.z The device acquires the CRLs for certificate verification.Figure 1-2 Request a certificate from a CA running RSA KeonConfiguration procedure1) Configure the CA server# Create a CA server named myca.In this example, you need to configure these basic attributes on the CA server at first:z Nickname: Name of the trusted CA.
