1-3When you configure a Track object, the specified NQA test group and Reaction entry can benonexistent. In this case, the status of the configured Track object is Invalid.Configuring Collaboration Between the Track Module and theApplication ModulesConfiguring Track-Static Routing CollaborationYou can check the validity of a static route in real time by establishing collaboration between Track andstatic routing.If you specify the next hop but not the egress interface when configuring a static route, you canassociate the static route with a Track object and thus check the validity of the static route according tothe status of the Track object.z If the status of the Track object is Positive, then the next hop of the static route is reachable, andthe configured static route is valid.z If the status of the Track object is Negative, then the next hop of the static route is unreachable,and the configured static route is invalid.Follow these steps to configure the Track-Static Routing collaboration:To do… Use the command… RemarksEnter system view system-view —Configure the Track-StaticRouting collaboration, so as tocheck the reachability of thenext hop of the static routeip route-static dest-address{ mask | mask-length }next-hop-address tracktrack-entry-number[ preference preference-value ][ tag tag-value ] [ descriptiondescription-text ]RequiredNot configured by default.
