3Com CS/3000-48 Installation Manual

Contents

B-6 APPENDIX B: STARTUP MESSAGESmean that the data test for RAM failed at address 0x4000010. The data thatwas expected was 0x0100. The actual data was 0xFFFF.Startup Test on Auxiliary Processor Board FailedMeaning: The auxiliary processor board failed startup tests administeredby communications server software.Status Register - FailedChannel Attention Interrupt Bit Not SetMeaning: The status register’s channel attention interrupt bit is not set.Status Register - FailedNMI Bit Not SetMeaning: The status register’s NMI bit is not set.Status Register - FailedTIC Interrupt Bit Not SetMeaning: The status register’s TIC interrupt bit is not set.TIC Interrupt Test - FailedMeaning: The TIC interrupt did not occur.Timer Test - FailedMeaning: One of the 8254 timer’s counters (1 or 2) failed its test.16-PortAsynchronousModule ErrorMessageThe following error message indicates that a 16-port asynchronous modulehas failed a self-test.Startup Test Failed on 16-port Asynchronous Module in Slot Meaning: The 16-port asynchronous module in slot failed a startuptest. Slot 1 is the slot closest to the power supply; slot 2 is themiddle slot; slot 3 is the slot farthest from the power supply.CS3000BookFile Page 6 Tuesday, October 15, 1996 5:12 PM