3Com CS/3000-48 Installation Manual

Contents

2-16 CHAPTER 2: INSTALLATIONTo connect the AUI port to a thick or thin coaxial, twisted-pair, or fiber-opticnetwork using a transceiver, fanout box, or hub, follow these steps:1 Install the external transceiver, fanout box, or hub on the network.Refer to the instructions that came with your transceiver, fanout box, or hub.2 Connect one end of the AUI cable to the AUI port and the other end to thetransceiver, fanout box, or hub.CAUTION: To eliminate cable noise emission in excess of FCC Part 15 SubpartJ, or CISPR22 (EN55022) for Class A devices, all cables should betriple-shielded (Inmac 536888 or equivalent) and have connectors withmetallic backshells. Cable shields should be connected to backshells.3 Slide the latch on the AUI port into the closed position, as shown:30 ft (9 m) Standard 3C619450 ft (15 m) Standard 3C619575 ft (23 m) Standard 3C6196100 ft (30 m) Standard 3C6197150 ft (46 m) Standard 3C61986 ft (2 m) PVC 3C110-00216 ft (5 m) PVC 3C110-00532 ft (10 m) PVC 3C110- 01049 ft (15 m) PVC 3C110- 01515 ft (4.6 m) Teflon® 3C615630 ft (9 m) Teflon 3C615750 ft (15 m) Teflon 3C615875 ft (23 m) Teflon 3C615915 ft (4.6 m) Positive attachment 3C613930 ft (9 m) Positive attachment 3C614050 ft (15 m) Positive attachment 3C614175 ft (23 m) Positive attachment 3C6142Table 2-3 3Com AUI Cables (continued)Length Type Part NumberCS3000BookFile Page 16 Tuesday, October 15, 1996 5:12 PM