| 
C-6 APPENDIX C: MONITOR UTILITYThe parameter specifies a bootfile on the diskette (ModelCS/3100 only). Valid entries are 0 through 9. For example, enter bt 2 toboot from file 2 on the diskette.The and parameters specify the name of the bootfileand the location in memory where it should be loaded. For example, enterbt _cs30 0x4000010 to load and run the file _cs30 from memorylocation 0x4000010.If you do not specify a parameter, the server attempts to boot from file 0 onthe diskette.COSyntax CODescription Copies the contents of a diskette to one or more diskettes (Model CS/3100only). For a description of the procedure, refer to “Copying and FormattingDiskettes”.DESyntax DE Description Deletes the specified file from the diskette (Model CS/3100 only). Validentries are 0 through 9. For example, enter de 2 to delete file 2 from thediskette.DFSyntax DFDescription Lists files on the diskette (Model CS/3100 only), including start and endblocks, length of the file, and starting address.DUSyntax DUDescription Dumps the server’s memory to a set of diskettes (Model CS/3100 only). Forinformation about memory dumps, refer to “Memory Dump Procedures”.CS3000BookFile Page 6 Tuesday, October 15, 1996 5:12 PM |
