2-9To do… Use the command… RemarksSet the timeout time for theuser interfaceidle-timeout minutes[ seconds ]OptionalThe default timeout time of a userinterface is 10 minutes.With the timeout time being 10 minutes,the connection to a user interface isterminated if no operation is performedin the user interface within 10 minutes.You can use the idle-timeout 0command to disable the timeoutfunction.Configuration ExampleNetwork requirementsAssume the switch is configured to allow users to log in through Telnet, and the user level is set to theadministrator level (level 3). Perform the following configurations for users logging in through theconsole port (AUX user interface).z Authenticate the users using passwords.z Set the local password to 123456 (in plain text).z The commands of level 2 are available to the users.z The baud rate of the console port is 19,200 bps.z The screen can contain up to 30 lines.z The history command buffer can store up to 20 commands.z The timeout time of the AUX user interface is 6 minutes.Network diagramFigure 2-6 Network diagram for AUX user interface configuration (with the authentication mode beingpassword)Configuration procedure# Enter system view. system-view# Enter AUX user interface view.[Sysname] user-interface aux 0
