1-20To do… Use the command… RemarksDisplay information about themember devices of the clusterdisplay cluster members[ member-number | verbose ]Clear the statistics on NDPportsreset ndp statistics[ interface port-list ] Available in user view.When you display the cluster topology information, the devices attached to the switch that is listed in thebacklist will not be displayed.Cluster Configuration ExamplesBasic Cluster Configuration ExampleNetwork requirementsThree switches compose a cluster, where:z A Switch 4500 series switch serves as the management device.z The rest are member devices.Serving as the management device, the Switch 4500 switch manages the two member devices. Theconfiguration for the cluster is as follows:z The two member devices connect to the management device through Ethernet 1/0/2 and Ethernet1/0/3.z The management device connects to the Internet through Ethernet 1/0/1.z Ethernet 1/0/1 belongs to VLAN 2, whose interface IP address is 163.172.55.1.z All the devices in the cluster share the same FTP server and TFTP server.z The FTP server and TFTP server use the same IP address: 63.172.55.1.z The NMS and logging host use the same IP address: 69.172.55.4.
