2-21Follow these steps to configure WINS servers for the DHCP client:To do… Use the command… RemarksEnter system view system-view —interface interface-type interface-numberdhcp server nbns-list ip-address&<1-8>Configure thecurrentinterface quitConfigureWINS serveraddresses forDHCP clients Configuremultipleinterfaces insystem viewdhcp server nbns-list ip-address&<1-8>{ interface interface-type interface-number [ tointerface-type interface-number ] | all }RequiredBy default, noWINS serveraddress isconfigured.interface interface-type interface-numberdhcp server netbios-type { b-node | h-node |m-node | p-node }Configure thecurrentinterfacequitConfigure aNetBIOSnode type forDHCP clients Configuremultipleinterfaces insystem viewdhcp server netbios-type { b-node | h-node |m-node | p-node } { interface interface-typeinterface-number [ to interface-typeinterface-number ] | all }RequiredBy default, noNetBIOS nodetype is specified.If b-node is specified for the client, you don’t need to specify any WINS server address.Configuring BIMS Server Information for the DHCP ClientA DHCP client performs regular software update and backup using configuration files obtained from aBIMS server. Therefore, the DHCP server needs to offer DHCP clients the BIMS server IP address, portnumber, shared key from the DHCP address pool.Follow these steps to configure BIMS server information for the DHCP client:To do… Use the command… RemarksEnter system view system-view —Configure the BIMS serverinformation to be assigned tothe DHCP clientdhcp server bims-server ipip-address [ port port-number ]sharekey key { interface interface-typeinterface-number [ to interface-typeinterface-number ] | all }RequiredBy default, no BIMSserver information isconfigured.Configuring Option 184 Parameters for the Client with Voice ServiceFor details about Option 184, refer to Configuring Option 184 Parameters for the Client with VoiceService.
