1-7SourceThis field indicates the source of the information, such as the source IP address of the log sender. Thisfield is optional and is displayed only when the output destination is the log host.ContextThis field provides the content of the system information.Information Center ConfigurationInformation Center Configuration Task ListComplete the following tasks to configure information center:Task RemarksConfiguring Synchronous Information Output OptionalConfiguring to Display the Time Stamp with the UTC Time Zone OptionalSetting to Output System Information to the Console OptionalSetting to Output System Information to a Monitor Terminal OptionalSetting to Output System Information to a Log Host OptionalSetting to Output System Information to the Trap Buffer OptionalSetting to Output System Information to the Log Buffer OptionalSetting to Output System Information to the SNMP NMS OptionalConfiguring Synchronous Information OutputSynchronous information output refers to the feature that if the system information such as log, trap, ordebugging information is output when the user is inputting commands, the command line prompt (incommand editing mode a prompt, or a [Y/N] string in interaction mode) and the input information areechoed after the output.This feature is used in the case that your input is interrupted by a large amount of system output. Withthis feature enabled, the system echoes your previous input and you can continue your operations fromwhere you were stopped.Follow these steps to configure synchronous information output:To do… Use the command… RemarksEnter system view system-view —Enable synchronousinformation output info-center synchronous RequiredDisabled by default
