1-2The loading process of the Boot ROM software is the same as that of the host software, except thatduring the former process, you should press “6” or and after entering the BOOTmenu and the system gives different prompts. The following text mainly describes the Boot ROMloading process.BOOT MenuStarting......******************************************************************* ** Switch 4500 26-Port BOOTROM, Version 3.01 ** *******************************************************************Copyright (c) 2004-2008 3Com Corporation and its licensors.Creation date : Sep 8 2008, 14:35:39CPU Clock Speed : 200MHzBUS Clock Speed : 33MHzMemory Size : 64MBMac Address : 00e0fc003962Press Ctrl-B to enter Boot Menu...Press . The system displays:Password :To enter the BOOT menu, you should press within five seconds (full startup mode) or onesecond (fast startup mode) after the information “Press Ctrl-B to enter BOOT Menu...” displays.Otherwise, the system starts to extract the program; and if you want to enter the BOOT Menu at thistime, you will have to restart the switch.Enter the correct Boot ROM password (no password is set by default). The system enters the BOOTMenu:BOOT MENU