1-6To do… Use the command… RemarksEnable LLDP TLV sendingfor specific types of LLDPTLVslldp tlv-enable { basic-tlv { all |port-description | system-capability |system-description | system-name } |dot1-tlv { all | port-vlan-id |protocol-vlan-id [ vlan-id ] |vlan-name [ vlan-id ] } | dot3-tlv { all |link-aggregation | mac-physic |max-frame-size | power } | med-tlv{ all | capability | inventory |location-id { civic-addressdevice-type country-code { ca-typeca-value }&<1–10> | elin-addresstel-number } | network-policy |power-over-ethernet } }Optional, the configurationapplies to the current port only.By default, all types of LLDPTLVs except locationidentification TLV are sent.Specify the managementaddress and specify tosend the managementaddress through LLDPDUslldp management-address-tlv[ ip-address ]Optional, the configurationapplies to the current port only.By default, the managementaddress is sent throughLLDPDUs, and themanagement address is the IPaddress of the interface of theVLAN with the least VLAN IDamong those permitted on theport. If the IP address of theVLAN interface is notconfigured, IP address127.0.0.1 is used as themanagement address.z To enable MED related LLDP TLV sending, you need to enable LLDP-MED capabilities TLVsending first. Conversely, to disable LLDP-MED capabilities TLV sending, you need to disable thesending of other MED related LLDP TLVs.z To disable MAC/PHY configuration/status TLV sending, you need to disable LLDP-MEDcapabilities TLV sending first.z When executing the lldp tlv-enable command, specifying the all keyword for basic LLDP TLVsand organization defined LLDP TLVs (including IEEE 802.1 defined LLDP TLVs and IEEE 802.3defined LLDP TLVs) enables sending of all the corresponding LLDP TLVs. For MED related LLDPTLVs, the all keyword enables sending of all the MED related LLDP TLVs except locationidentification TLVs.z Enabling sending of LLDP-MED capabilities TLVs also enables sending of MAC/PHYconfiguration/status TLVs.Enable LLDP PollingWith LLDP polling enabled, a device checks for the local configuration changes periodically. Upondetecting a configuration change, the device sends LLDPDUs to inform the neighboring devices of thechange.Follow these steps to enable LLDP polling: