V7122 Gateway User Guide 237ini File Field NameWeb Parameter Name Valid Range and DescriptionDTMFInterDigitInterval Time in msec between generated DTMF digits to PSTN side (ifTxDTMFOption = 3, 5 or 6).The default value is 100 msec. The valid range is 0 to 32767.DTMFDigitLength Time in msec for generating DTMF tones to the PSTN side (ifTxDTMFOption = 3, 5 or 6).The default value is 100 msec. The valid range is 0 to 32767.VQMonEnable[Enable RTCP XR]Enables voice quality monitoring and RTCP Extended Reports (RTCP-XR).Valid options include:0 = Disable (default)1 = EnableFor a description of the RTCP-XR reports, see Appendix F: RTP ControlProtocol Extended Reports (RTCP-XR) .RTCPInterval[RTCP XR Packet Interval]Defines the time interval (in msec) between adjacent RTCP reports.The interval range is 0 to 65,535. The default interval is 5,000.DisableRTCPRandomize[Disable RTCP XR IntervalRandomization]Controls whether RTCP report intervals are randomized or whether eachreport interval accords exactly to the parameter RTCPInterval.Valid options include:0 = Randomize (default)1 = No RandomizeRTCPXREscIP[RTCP XR Collection Server]IP address of the Event State Compositor (ESC). The gateway sendsRTCP-XR reports using PUBLISH messages to this server. The addresscan be configured as a numerical IP address or as a domain name.RTCPXRReportMode[RTCP XR Report Mode]Determines whether or not RTCP-XR reports are sent to the Event StateCompositor (ESC) and if so, defines the interval in which they are sent.Valid options include:0 = Disable (RTCP-XR reports are not sent to the ESC) -- default1 = End Call (RTCP-XR reports are sent to the ESC at the end of eachcall)2 = End Call & Periodic (RTCP-XR reports are sent to the ESC at theend of each call and periodically according to the parameterRTCPInterval)Configuration Files ParametersThe configuration files (Call Progress Tones, PRT, Voice Prompts and CAS) can be loadedto the gateway using the Embedded Web Server (see Auxiliary Files), or using TFTPsession.To load the configuration files using TFTP:1 In the ini file, define the files to be loaded to the device. You can also define in the ini filewhether the loaded files should be stored in the non-volatile memory so that the TFTPprocess is not required every time the device boots up.
