52 V7122 GatewayUser GuideUnpackingTo unpack the TP-1610:1 Open the carton and remove packing materials.2 Remove the TP-1610 board from the carton.3 Check that there is no equipment damage.4 Check, retain and process any documents.5 Notify 3Com or your local supplier of any damage or discrepancies.6 Retain any diskettes or CDs.Package ContentsEnsure that in addition to the TP-1610, the package contains: Optionally, an RTM module CD (software and documentation) This User Guide The V7122 Gateway Release NotesInstalling the TP-1610The TP-1610 cPCI board is hot-swappable and can therefore be removed from a slot (andinserted into a slot) while the chassis is under power. It is recommended though that youpower down the chassis and read the notes before replacing the components.Before removing or inserting boards from / to the chassis, attach a wrist strap forelectrostatic discharge (ESD) and connect it to the rack frame using an alligatorclip.Do not set components down without protecting them with a static bag.Inserting BoardsTo insert the TP-1610 board into the chassis:1 Choose an available slot in a compactPCI™ chassis and gently insert the TP-1610 boardinto it; as the TP-1610 board is inserted, the black plastic handles, at both ends of theboard’s front panel, must engage with the chassis. When the TP-1610 board is firmlymounted into the correct position inside the chassis, the red plastic latches within eachhandle self-lock (this also ensures that the TP-1610 board is properly earthed using thechassis) and the blue hot-swap LED is lit.2 Wait for the blue hot-swap LED to turn off, indicating that the board has been insertedcorrectly and the power supply is functioning correctly.
