V7122 Gateway User Guide 261AttributeNumberAttributeNameVSANo. Purpose ValueFormat Sample AAA1code other number failed) accepted44 Acct-Session-IdA unique accountingidentifier – match start &stopString Stop AccRADIUS Server MessagesIn Figure 79, non-standard parameters are preceded with brackets.Figure 79 Accounting ExampleAccounting-Request (361)user-name = 111acct-session-id = 1nas-ip-address = 212.179.22.213nas-port-type = 0acct-status-type = 2acct-input-octets = 4841acct-output-octets = 8800acct-session-time = 1acct-input-packets = 122acct-output-packets = 220called-station-id = 201calling-station-id = 202// Accounting non-standard parameters:(4 923 33) h323-gw-id =(4 923 23) h323-remote-address = 212.179.22.214(4 923 1) h323-ivr-out = h323-incoming-conf-id:02102944 600a1899 3fd610090e2f3cc5(4 923 30) h323-disconnect-cause = 22 (0x16)(4 923 27) h323-call-type = VOIP(4 923 26) h323-call-origin = Originate(4 923 24) h323-conf-id = 02102944 600a1899 3fd61009 0e2f3cc5Trunk to Trunk Routing ExampleThis example describes two gateways, each interface with the PSTN through four E1 spans.Gateway ‘A’ is configured to route all incoming TelÆIP calls to gateway ‘B’. Gateway ‘B’generates calls to PSTN on the same E1 Trunk as the call was originally received (ingateway ‘A’). Gateway ‘A’ IP address is 192.168.3.50 Gateway ‘B’ IP address is 192.168.3.51
