Program features24External controlWhen the drive is in external control, the commands are given through the controlterminal block on the standard I/O board (digital and analog inputs), optional I/Oextension modules and/or CH0 Fieldbus Adapter. In addition, it is also possible toset the control panel as the source for the external control.External control is indicated by a blank on the panel display or with an R in thosespecial cases when the panel is defined as a source for external control.SettingsPanel Key Additional InformationLOC/REM Selection between local and external controlParameter10.01 Start and stop source for EXT110.02 Direction source for EXT111.03 Reference source for EXT1Group 98 OPTION MODULES Activation of the optional I/O and serial communicationExternal Control through the Input/Output terminals, or through thefieldbus interfaces1 R ->1242 rpm I1 ->1242 rpm IExternal Control by control panel
