Program features25Block diagram: start, stop, direction source for EXT1The figure below shows the parameters that select the interface for start, stop, anddirection for external control location EXT1.Block diagram: reference source for EXT1The figure below shows the parameters that select the interface for the speedreference of external control location EXT1.CH0 / RDCO boardKEYPADEXT1XT DI1COMM.MODULEControl panelStart/stopDI1 / Std IO = Digital input DI1 on the standard I/O terminal blockDI1 / DIO ext 1 = Digital input DI1 on the Digital I/O Extension Module 1 (XT DI1 in Parameters)10.01SelectFieldbus Adapter Slot1DI1 / Std IODI2 / Std IODI1 / DIO EXT 1DI1, DI2I/O ExtensionsSee parametergroup 98 OPTIONMODULESFb. selectionSee chapterFieldbus controlEXT1AI1 / Std IOAI1 / AIO ext 11.03SelectCH0 / RDCO boardKEYPADCOMM.MODULEControl panelAI2 / Std IOAI3 / Std IOAI1, AI2, AI3XT AI1REF1 (rpm)ReferenceAI1 / Std IO = analog input AI1 on the standard I/O terminal blockAI1 / AIO ext = analog input AI1 on the Analog I/O Extension Module (AI5 in Parameters)I/O ExtensionsSee parametergroup 98 OPTIONMODULESFb. selectionSee chapterFieldbus control
