3.4.5 Replacing the SMB batteryNoteThe battery low alert (38213 Battery charge low) is displayed when the batteryneeds to be replaced. The recommendation to avoid an unsynchronized robotis to keep the power to the controller turned on until the battery is to be replaced.For a SMB board with 3-pole battery contact (RMU101 3HAC044168-001 orRMU102 3HAC043904-001), the lifetime of a new battery is typically 36 months.For a SMB board with 2-pole battery contact (DSQC), the typical lifetime of a newbattery is 36 months if the robot is powered off 2 days/week or 18 months if therobot is powered off 16 h/day. The lifetime can be extended for longer productionbreaks with a battery shutdown service routine. See Operating manual - IRC5with FlexPendant for instructions.WARNINGSee instructions for batteries, Safety risks during handling of batteries on page 35.Location of SMB batteryThe SMB battery (SMB = serial measurement board) is located on the left handside of the frame as shown in the figure.Battery pack with a 2-pole battery contact (DSQC)xx0500002486SMB battery coverASMB battery packBBattery cableCContinues on next pageProduct manual - IRB 760 1353HAC039838-001 Revision: M© Copyright 2011-2018 ABB. All rights reserved.3 Maintenance3.4.5 Replacing the SMB battery
