14.3.3 Setting guidelines GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2Operation: On or Off14.4 Logic for group alarm WRNCALH14.4.1 Identification GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberLogic for group warning WRNCALH - -14.4.1.1 Application GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1Group warning logic function WRNCALH is used to route warning signals toLEDs and/or output contacts on the IED.WRNCALH output signal WARNING and the physical outputs allows the user toadapt the warning signal to physical tripping outputs according to the specificapplication needs.14.4.1.2 Setting guidelines GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2OperationOn or Off14.5 Logic for group indication INDCALH14.5.1 Identification GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberLogic for group indication INDCALH - -14.5.1.1 Application GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1Group indication logic function INDCALH is used to route indication signals todifferent LEDs and/or output contacts on the IED.INDCALH output signal IND and the physical outputs allows the user to adapt theindication signal to physical outputs according to the specific application needs.1MRK 505 393-UEN B Section 14LogicLine differential protection RED650 2.2 IEC 303Application manual
