The information icon alerts the reader of important facts and conditions.The tip icon indicates advice on, for example, how to design yourproject or how to use a certain function.Although warning hazards are related to personal injury, it is necessary to understandthat under certain operational conditions, operation of damaged equipment may resultin degraded process performance leading to personal injury or death. Therefore,comply fully with all warning and caution notices.1.4.2 Document conventionsA particular convention may not be used in this manual.• Abbreviations and acronyms in this manual are spelled out in the glossary. Theglossary also contains definitions of important terms.• Push button navigation in the LHMI menu structure is presented by using the pushbutton icons.To navigate between the options, use and .• HMI menu paths are presented in bold.Select Main menu/Settings.• LHMI messages are shown in Courier font.To save the changes in non-volatile memory, select Yes and press .• Parameter names are shown in italics.The function can be enabled and disabled with the Operation setting.• The ^ character in front of an input or output signal name in the function blocksymbol given for a function, indicates that the user can set an own signal name inPCM600.• The * character after an input or output signal name in the function block symbolgiven for a function, indicates that the signal must be connected to anotherfunction block in the application configuration to achieve a valid applicationconfiguration.• Dimensions are provided both in inches and mm. If it is not specifically mentionedthen the dimension is in mm.1MRK 502 043-UUS B Section 1Introduction33Technical Manual
