14.1.2.2 Function blockThe available function blocks of an IED are depending on the actual hardware (TRM)and the logic configuration made in PCM600.CVMMXNI3P*V3P*SS_RANGEP_INSTPP_RANGEQ_INSTQQ_RANGEPFPF_RANGEILAGILEADVV_RANGEII_RANGEFF_RANGEANSI10000051-1-en.vsdANSI10000051 V1 ENFigure 187: CVMMXN function block14.1.2.3 SignalsTable 282:CVMMXN Input signalsName Type Default DescriptionI3P GROUPSIGNAL- Three phase group signal for current inputsV3P GROUPSIGNAL- Three phase group signal for voltage inputsTable 283:CVMMXN Output signalsName Type DescriptionS REAL Apparent power magnitude of deadband valueS_RANGE INTEGER Apparent power rangeP_INST REAL Active powerP REAL Active power magnitude of deadband valueP_RANGE INTEGER Active power rangeQ_INST REAL Reactive powerQ REAL Reactive power magnitude of deadband valueQ_RANGE INTEGER Reactive power rangeTable continues on next page1MRK 502 043-UUS B Section 14Monitoring393Technical Manual
