Copyright © Acronis, Inc., 2000-2010 173task anyway. With this setting, the program will automatically handle the situation when theconditions are not met for too long and further delaying the backup is undesirable. backup task start time matters - skip the backup task if the conditions are not met at the timewhen the task should be started. Skipping the task run makes sense when you need to back updata strictly at the specified time, especially if the events are relatively often.Adding multiple conditionsMultiple conditions must be met simultaneously to enable task execution.Example:It is required to run the backup task after free space on the managed machine is changed by at least1 GB, but only if all users are logged off and more than 12 hours have passed since the last backup.Set the schedule, conditions and the Task start conditions backup option as follows: Schedule: When free space changed; Value: Run task if free space has changed by at least: 1 GB. Condition: User logged off; Value: Run the task on schedule only if all users are logged off. Condition: Time since last backup; Value: Time since the last backup: 12 hour(s). Task start conditions: Wait until the conditions are met.If the free space changes by more than 1 GB, the scheduler will wait until both conditions are met atthe same time and then run the backup task.5.6.1 User is idleApplies to: Windows"User is idle" means that a screen saver is running on the managed machine or the machine is locked.Example:Run the backup task on the managed machine every day at 9PM, preferably when the user is idle. Ifthe user is still active by 11PM, run the task anyway. Event: Daily, every 1 day(s); Once at: 09:00:00 PM. Condition: User is idle. Task start conditions: Wait until the conditions are met, Run the task anyway after 2 hour(s).As a result,(1) If the user becomes idle before 9PM, the backup task will start at 9PM.(2) If the user becomes idle between 9PM and 11PM, the backup task will start immediately after theuser becomes idle.(3) If the user is still active at 11PM, the backup task starts anyway.5.6.2 Location's host is availableApplies to: Windows, Linux"Location's host is available" means that the machine hosting the destination for storing archives ona networked drive is available.
