Copyright © Acronis, Inc., 2000-2010 277Please note, that due to setting the new active volume, the former active volume letter might be changedand some of the installed programs might stop running.3. If another active volume is present in the system, you will receive the warning that the previousactive volume will have to be set passive first. By clicking OK in the Warning window, you'll addthe pending operation of setting active volume.Please note: even if you have the Operating System on the new active volume, in some cases the machinewill not be able to boot from it. You will have to confirm your decision to set the new volume as active.(To finish the added operation you will have to commit (p. 278) it. Exiting the program withoutcommitting the pending operations will effectively cancel them.)The new volume structure will be graphically represented in the Disk management viewimmediately.6.11.6.4 Change volume letterWindows operating systems assign letters (C:, D:, etc) to hard disk volumes at startup. These lettersare used by applications and operating systems to locate files and folders in the volumes.Connecting an additional disk, as well as creating or deleting a volume on existing disks, mightchange your system configuration. As a result, some applications might stop working normally oruser files might not be automatically found and opened. To prevent this, you can manually changethe letters that are automatically assigned to the volumes by the operating system.If you need to change a letter assigned to a volume by the operating system:1. Select a volume to change a letter.2. Right-click on the selected volume, and then click Change letter in the context menu.3. Select a new letter in the Change Letter window.4. By clicking OK in the Change Letter window, you'll add a pending operation to volume letterassignment.(To finish the added operation you will have to commit (p. 278) it. Exiting the program withoutcommitting the pending operations will effectively cancel them.)The new volume structure will be graphically represented in the Disk management viewimmediately.6.11.6.5 Change volume labelThe volume label is an optional attribute. It is a name assigned to a volume for easier recognition. Forexample, one volume could be called SYSTEM — a volume with an operating system, or PROGRAM —an application volume, DATA — a data volume, etc., but it does not imply that only the type of datastated with the label could be stored on such a volume.In Windows, volume labels are shown in the Explorer disk and folder tree: LABEL1(C:), LABEL2(D:),LABEL3(E:), etc. LABEL1, LABEL2 and LABEL3 are volume labels. A volume label is shown in allapplication dialog boxes for opening and saving files.If you need to change a volume label:1. Right-click on the selected volume, and then click Change label.2. Enter a new label in the Change label window text field.3. By clicking OK in the Change label window, you'll add the pending operation of changing thevolume label .
