Blinking Appliances, Enclosures, and Disk DrivesYou can blink the LEDs on your iSCSI Storage Appliances, enclosures, and the diskdrives installed in your appliances and enclosures to identify where they arephysically located.To blink a component:1 In Adaptec Storage Manager, right-click the component, then select Blink....This table describes what to right-click to blink specific iSCSI Storage Appliances,enclosures, and disk drives.The LEDs on the component begin to flash.2 Click OK to stop blinking the component.Right-click... To Blink...iSCSI Storage Appliance in theEnterprise ViewThe iSCSI Storage ApplianceController icon in the Physical DevicesViewAll disk drives installed in an iSCSIStorage Appliance and attached JBODsDisk Drive icon A specific disk driveEnclosure Management Device icon An enclosurePool icon All disk drives included in a poolLogical Device icon All disk drives included in a logical driveText in the Logical Devices View All disk drives included in all pools on aspecified iSCSI Storage ApplianceText in the LogicalDevices ViewAll disk drives included in all the logicaldrives on a selected controller
