Safety Precautions• Environmental Conditions — Make sure the physical environment in which theunit resides falls within the specifications for your model as described in thisguide.• Installing the Server or Expansion Array — During installation, make sure theunit is always placed on a surface capable of supporting its weight.• Connecting to the Main Power — Install the unit near an easily accessible powersource. Make sure the source is the proper voltage for your model. Place thepower cord(s) out of the way of traffic; do not place any object over the powercord(s). If the unit is taken offline for an extended period, disconnect it from thepower source to avoid possible damage from a power surge.• Enclosure Openings — Openings in the enclosure ensure proper airflow andprevent overheating; do not cover these openings. Never place liquids on or nearthe unit to avoid spillage; liquid entering an enclosure opening could cause fireor electrical shock.• Cleaning the Unit — Before cleaning the unit, be sure to disconnect all cabling. Donot use any liquid or spray cleaning agents to clean the unit; use only a dampsheet or cloth.• Servicing the Unit — Never open the unit. For safety reasons, the unit should onlybe opened under the guidance of qualified service personnel.If one of the following situations arises, do not attempt a remedy; contact Adaptectechnical support for assistance before proceeding:• The power cord or plug is damaged.• Liquid has penetrated the server.• The unit has been exposed to moisture.• The unit is dropped or otherwise physically damaged.• The unit has obvious signs of damage.
